Roller conveyor type R50-70
Roller conveyors in stainless steel design
Roller conveyor type R50-70
Roller conveyors in stainless steel design
Base frame: without base frame (basic type)
Incline: Orbit inclination between -35° and +35°
Protrusion: not applicable
- Description
- Advantages
- Technical data
- Media
Stainless steel roller conveyors are used in wet areas or clean rooms. In the illustrated version with a 70 mm high frame, the rollers form the highest point, allowing the material to travel to the end of the roller conveyor without lateral guidance. Usable widths range from 100 to 1,200 mm in 50 mm increments. Frames made of steel or stainless steel are possible. The rollers are made of PVC, galvanized steel, aluminum, or stainless steel and have a roller diameter of 50 mm.
Depending on the application, the rollers are spaced at 62.5 / 75 / 100 / 150 or 200 mm. The R-50/70 model is available without side guides, while the R-50/100 model has 30mm high side guides. Adjustable side guides are optionally available. The end stop is installed if required. Height- and tilt-adjustable base frames are also available.
Cost-effective transport route without drive
Available in steel and stainless steel frames
Transport of laterally protruding components possible
Different roll materials for different applications
Flexible division of roles depending on the task
Rollers form the highest point for free running
Feature
Value
Roll diameter:
50 mm
Roller conveyor widths:
200 - 1,200 mm in 50 mm increments
Division of roles:
62.5 / 75 / 100 / 125 / 150 / 200mm
Roll material:
PVC, steel, stainless steel, aluminum
Required gradient:
2 - 5%, depending on the nature and weight of the material being conveyed
Material profile frame:
steel or stainless steel
Ambient temperature:
0°C to +50°C
There are no media available.
Downloads
