Small conveyor type IL-HM 480

Straight small conveyor belt with several supports on the side of the belt body

Small conveyor type IL-HM 480

Straight small conveyor belt with several supports on the side of the belt body

Base frame: stepless height adjustment
Incline: Extreme belt gradient possible
Protrusion: no protruding base frame parts

  • Description
  • Advantages
  • Technical data
  • Media

The straight I-Tech small conveyor belts of type IL-HM 480 are the ideal solution when space is limited. Their low overall height of only around 30 mm and the optimal ratio of outer width to usable width allow the small conveyor belts to be integrated into the tightest machine or tool shafts. The "I" in the I-Tech designation stands for "integration." of small conveyor belts in machine shafts, production processes, automation systems, etc.

For longer and wider small conveyor belts, the HM 480 base frame represents a stable yet lightweight solution. The H-shaped base stands are equipped with telescopic stand profiles made of anodized aluminum. These are attached to the sides of the conveyor belt, leaving only a slight overhang. The brackets incorporate pivot points located below the belt body. These allow for continuous adjustment of the inclination of the small conveyor belt.

Since there is no upward overhang of the subframe attachments, this design is ideal for use as a conveyor belt for extra-wide parts that extend laterally beyond the belt body. This small conveyor belt is also often used as a robot storage conveyor belt or as a transfer belt between two processing steps.

For these conveyor belts, 13 conveyor belts made of different materials with different surface structures and properties from the MTF technology standard program are available, which can be mounted on these devices. If required, additional special belts can be provided.

The I-Tech belt conveyors type IL-HM 480 can be equipped with three different drive units, which, in combination with various gear ratios, performance classes, and controls, ensure optimal adaptation to the respective conveying task.

Configure your individual small conveyor quickly and easily using our free online configurator and immediately receive a 2D or 3D CAD model in your desired data format. Use the configuration for your inquiry and receive a non-binding quote immediately. Our consultants will be happy to assist you.

Optimal solution for extra-wide workpieces

Ideal for tight spaces

Different drive units for every application

Optional version with rolling knife edge for minimal space requirements

Underframe supports movable along the conveyor belt profile

No components protruding above the deck level, so goods overlapping laterally can also be transported

Feature

Value

Widths:

70 mm to 500 mm

Lengths:

600 mm to 6,000 mm

Conveyor speeds:

from 3.0 to 15.2 m/min [max. 65 m/min.]

Belt load:

2kg/m

Deflection:

Ø32mm, as rolling knife edge Ø16mm, Ø9mm, Ø8mm

Lateral guiding height:

0mm, 12 mm as folded stainless steel guide plate

Drive types:

below belt body, flange drive side, drum motor, center motor

transport:

For horizontal transport and gradients up to 60°

Special dimensions and designs:

upon request

Available as:

Included as standard in the configurator

There are no media available.

Downloads

Product information (PDF)
Small conveyor belt type IL

Details MTF Technik 
Hardy Schürfeld GmbH & Co. KG