Wherever material needs to be removed from very low loading areas and then conveyed at an incline, the MTF I-Tech angled conveyor belts type INL-HE 050 are the perfect solution. The low frame height of only 30 mm enables the construction of conveyor belts with a total height of less than 80 mm.

Larger angled small conveyor belts are often equipped with a type HE 060 base frame. Here, an H-shaped base frame forms the basis for the vertical aluminum profiles. This stable, yet lightweight version of a small conveyor belt is particularly suitable when the flat belt section either rests directly on the floor or is supported by additional base frames. Conveyor technology of this type is frequently used to transport parts from plastic injection molding machines where the available machine bed height is limited due to additional attachments under the tool. Further possible applications for the small conveyor belt type INL-HE 050 are in packaging machines.

A total of seven different conveyor belts made of PVC, PU, ​​or polyester material with various surface structures and properties are available for these conveyor belts. In addition to these belts from the MTF standard range, special types can also be installed if required.

The I-Tech angled conveyor belts type INL-HE 050 can be equipped with three different drive units, which, in combination with various power ratings, gear ratios, and controls, ensure optimal adaptation to the respective transport task.

Building on this basic equipment, the conveyor belts can be functionally expanded with a wide range of accessories. These include fans, radiant heaters, ionization devices, covers, sensors, chutes, hoods, etc.