The positively angled Multi-Tech belt conveyors, type PL-HM 010, are assembled according to a comprehensive modular system and can thus be individually configured to meet the specific requirements of customer projects.

The HM 010 base frame is used primarily for straight storage conveyors. It is also used for larger angled conveyors where a closed base frame is no longer practical due to the belt size, and lateral overhang of the base frame supports is undesirable. The individual supports are mounted below the conveyor belt frame and can be moved freely along the profile grooves.

A positively angled belt conveyor of the type PL-HM 010 can also serve as a robot deposit belt on an injection molding machine. The robot places the products on the upper, horizontal section of the conveyor belt and transports them downwards toward the operating personnel. Communication with the on-site robot control system is established via a timing switch in conjunction with a light barrier and a belt clearance sensor. Due to the size of the conveyor belt, the individual supports are braced both lengthwise and diagonally to ensure secure stability.

A wide variety of conveyor belts made of different materials, with different surface structures and properties, are available from the MTF Technik standard range and can be mounted on these devices. If required, additional special belts can be provided.

The Multi-Tech angled conveyor belts type PL-HM 010 can be equipped with five different drive units, which, in combination with various gear reductions and controls, ensure optimal adaptation to the conveying task.

Building on the basic equipment, a wide range of accessories and equipment elements can be added, such as metal detectors, fans, cooling systems, heaters, ionization devices, conveyor belt covers, sensors, chutes, separation attachments, etc.