Belt Conveyor Type ZL-HB 310

Z-Shaped Belt Conveyor

MTF Technik Fördertechnik - MTF Technik Fördertechnik

Z-angled conveyor type ZL-HB 310 for Transport of punched parts. The conveyor is equipped with a resistant belt with corrugated edges and a cover in the flat belt area, in order to guide the parts towards the centre of the belt. In addition, there are skids below the lower flat belt for protection of the cleats and corrugated edges.


MTF Technik Fördertechnik - MTF Technik Fördertechnik

Z-angled conveyor type ZL-HB 310 for Transport of punched parts. The conveyor is equipped with a resistant belt with corrugated edges and a cover in the flat belt area, in order to guide the parts towards the centre of the belt. In addition, there are skids below the lower flat belt for protection of the cleats and corrugated edges.


Z-shaped, angled conveyors with a lower feeding height are equipped with an underframe type HB 310. Here, the flat belt is supported by the framework of the underframe, while the steep belt is supported by two gas pressure springs to enable an easy angle adjustment. The double support in the steep belt provides a stable standing - in particular, for wider conveyor belts or higher loads.

In this version, the conveyors are used as chipping/splints conveyors in machine tools where the conveyor belt is integrated in the machine frame. Comparable applications can be found in the recycling sector where paper or cardboard cuttings are disposed of, or they are used for the transport of punching waste and scrap to a container.

This conveyor belt specification is also suitable for the application in the plastics industry e.g. in injection moulding machines with low shaft height or in combination with separating diverters which are mounted underneath the tool and thus are restricting the available space.

Product Information

Belt Conveyors Type ZL

Highlights

Z-shaped conveyors are equipped with the underframe HB 310 if lowest feeding heights are to be realised. The flat belt thereby hangs in the underframe and thus, can be lowered to the floor. The angle adjustment of the steep belt is easily possible through two integrated gas pressure springs.

  • Low feeding heights for long flat belts
  • Easy angle adjustment due to gas pressure spring support
  • Stable underframe for force-free bend geometry

Application Examples and Tutorials

Video: Functionality of the Carriage Type TF 110 (similar device)


MTF Specialist

Do you need a customized offer?

Please find below Inquiry Forms for standard devices of Conveyor Technique, Separation and Automation in PDF-format.
Go to Inquiry Forms