Accessories for conveyor technology

The sliding plates under the separating drums can be covered with various materials upon customer request (e.g., white PU).

To reduce noise levels – e.g. in the die-casting industry – separating drums can be fitted with soundproof hoods.

Screws inside a perforated drum are used to slow down round parts or to transport parts in a targeted manner when the drum is horizontal.

Interfaces between MTF conveying or automation equipment and customer-supplied production facilities are defined on a project-specific basis.

Protective plate at the cable outlet of a drum motor drive.

Side guide made of anodized aluminum, mounted on the inside of the guide profile.

Various sensors such as reflective light barriers, light switches, etc. are used to monitor conveying processes or to query parts for positioning.

The black plastic caps serve to cover the band tensioning and adjustment mechanisms integrated into the guide profile.

With the help of a programmable logic controller (PLC) and appropriate sensors, e.g. light barriers, a wide variety of conveying tasks can be optimally implemented.

Dust barriers are used, for example, at the outlet of a conveyor belt to prevent the conveyed material from falling off or to center containers.

Pneumatic dust beams are used, for example, for container centering and alignment at transfer points between two conveyors.

Socket on the conveyor belt body, e.g. for connecting a separating attachment.

Cleat compartment covers at the belt inlet of inclined conveyor belts prevent the conveyed material from falling out of the belt body and allow the conveyor belt to run empty.

Below the cleat body, for example, skids can be mounted as stud protection.

Stop cylinders are used to position or accumulate conveyed goods. The stop is moved in front of the conveyed goods.

Part centering is achieved using spring-loaded plastic strips resting on the belt.

Dividing and track plates are used to divide the conveyor line into different tracks or, for example, to convey the parts away laterally, as shown in the picture.

Transfer hood at the conveyor belt outlet for targeted part routing.