The Z-shaped angled Multi-Tech magnetic conveyor belts type ZMF-HM 010 are individually adapted to the specific requirements of each customer. Five different conveying angles between 30° and 90° are available. This makes these conveyor belts ideal for transporting magnetic parts steeply upwards in a space-saving manner.

Larger Z-shaped angled magnetic conveyor belts with a long, steep belt section can be used with a type HM 010 base frame. The underframe consists of several H-shaped base frames made of a sturdy welded steel construction. Telescopic aluminum profiles are mounted on these frames and secured in the lower grooves of the conveyor body by means of a pivot point. Thus, the entire lateral groove of the conveyor is available for the easy attachment of components and accessories. Conveyor belts of this design are often used to transport stamping scrap into larger containers or to transport finished parts to higher processing machines or similar equipment. The belt body of the angled magnetic conveyor type ZMF-HM 010 consists of an aluminum profile system. The sturdy profiles each have a groove on the side and below the conveyor belt, which can be used for attaching substructures, drive units, sensors, and other components. This avoids costly drilling or welding work and ensures maximum flexibility. Plastic guide rails are integrated into the belt body, guiding two circulating chains. Magnetic carrier strips are mounted on these chains at regular intervals, running beneath a stainless steel slide plate integrated into the belt body. Ferritic material lying on the slide plate is attracted by the magnetic force and pulled along. Strong neodymium magnets ensure high holding power and efficient part transport. The slide plates are available with either a smooth or textured surface, depending on the application. Especially with slender parts, the structure ensures that adhesion is avoided and the parts are transported safely. If necessary, additional wear plates are mounted in the feed area of ​​the conveyed goods. Spring tensioners are integrated into the conveyor belt construction to keep the chains under sufficient tension at all times, thus reducing adjustment and maintenance efforts. The belt body is completely encapsulated, so there are no external moving parts. This ensures maximum... on occupational safety.

The Multi-Tech magnetic conveyor belts of type ZMF-HM 010 are equipped with powerful three-phase motors, which are adapted to the respective conveying task with different motor outputs, gear ratios and controls.