Double-track conveyor belt with reversing direction

Details MTF Technik Hardy Schürfeld GmbH & Co. KG

Task: Convey different plastic parts in parallel in different directions

An automotive supplier produces various plastic parts on an injection molding machine. These are often right/left parts or larger products.

The products are to be placed on a conveyor belt by a robot.

The robot switches on a 400V socket to control the conveyor belt

If right and left parts are produced, confusion at the manual part acceptance must be safely excluded

Solution: Laterally abutting conveyor belts with reversing operation

Two GL conveyor belts abutting sideways, with no side guides on the abutting surface and an 80mm high side guide on the outside

Both belts have constant speed drives with a manual switch for reversing the direction

The conveyor belts are designed for continuous reversing operation. For this purpose, the running decks are guided

When producing right-hand and left-hand parts, the conveyor belts run in different directions, so the parts are delivered to different locations. This prevents unwanted mix-ups.

When producing large parts, the conveyor belts run in the same direction

Both conveyor belts are mounted on a base frame and firmly connected to each other, creating a very compact unit.

The conveyor belts are equipped with very easy-to-carry running surfaces (MTF No. 1) upon customer request.

Details MTF Technik Hardy Schürfeld GmbH & Co. KG