Belt No. 1
Adhesive PVC conveyor belt for inclined transport of unit loads
Belt No. 1
Adhesive PVC conveyor belt for inclined transport of unit loads
Material: PVC
Temperature resistance: -15°C to +80°C
FDA/EU compliance: no
- Description
- Advantages
- Technical data
Our structured conveyor belt No. 1 is suitable for a wide range of conveying tasks in many industries. Due to the high adhesion of the PVC material, it can be used for inclined transport without cleats. This belt is particularly suitable for transporting individual items (e.g., cartons/boxes) and for acceleration belts and transfer situations. The fabric on the underside of the belt is particularly quiet.
High adhesion strength for good material handling
Uphill transport of general cargo without carrier cleats possible
Suitability for acceleration belts
Low-noise fabric on the running side for smooth belt operation – even at high speeds
Wide range of applications - especially in the area of general cargo transport
Durable surface
Feature
Value
Material on the carrying side:
PVC
Temperature resistance:
-15°C to +80°C
Total thickness:
approx. 2.8 mm
FDA/EU compliance:
no
Antistatic properties:
Yes
Suitability for metal detectors:
Yes
Oil and grease resistance:
conditional
Surface hardness:
approx. 45° Shore A
Maximum width for angled conveyor belts:
500 mm
Minimum pulley diameter:
50 mm
Es sind keine Medien vorhanden.
Downloads
