Belt no. 2
Adhesive PVC conveyor belt with supergrip surface for inclined transport of piece goods
Belt no. 2
Adhesive PVC conveyor belt with supergrip surface for inclined transport of piece goods
Material: PVC
Temperature resistance: -15°C to +85°C
FDA/EU conformity: no
- Description
- Advantages
- Technical data
Due to its super-grip surface and deep structuring, this conveyor belt is extremely adhesive and therefore particularly suitable for inclined conveying without cleats. It can be used on conveyor belts with piece goods (e.g., cartons/boxes) and for acceleration belts. Since cleats are usually not required, the conveyor belt is also suitable for use with separating roller attachments at the conveyor belt outlet.
High adhesion force for good material handling
Surface with deep structuring for e.g. sprues in the plastics industry
Suitability on conveyor belts equipped with a separating roller separator
Suitable for inclined transport of piece goods without the use of carrier cleats
Soft surface absorbs product impact
Wide range of applications for general cargo transport
Feature
Value
Material carrying side:
PVC
Temperature resistance:
-5°C to +80°C
Total thickness:
approx. 5.6 mm
FDA/EU compliance:
no
Antistatic properties:
Yes
Suitability for metal detectors:
Yes
Oil and grease resistance:
conditional
Surface hardness:
approx. 45° Shore A
Max. width for angle conveyor belts:
500 mm
Minimum pulley diameter:
60 mm
Es sind keine Medien vorhanden.
Downloads
